2x JBL VRX932LAP + 2x VRX918SP Active Line-Array Speaker+Poles

package Includes :

2 X JBL VRX932LAP

2 X JBL VRX918SP

2 X JBL Speaker Pole

JBL VRX932LAP

The VRX932LAP is a powered, lightweight, compact 12″” two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line array performance is needed but the venue size doesn’t call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital

JBL VRX918SP

The VRX918SP is a powered, 18″” direct radiating subwoofer. It is intended for use in suspended arrays or ground-stack applications. The built-in JBL DrivePack DPC-2 amplifier module, designed in cooperation with Crown, provides 1500 Watts of peak power. The DSP based resident input module provides system optimization, EQ and crossover functionality. The integrated suspension system is designed for full compatibility with the VRX-AF array frame and the VRX932LAP line array speaker systems.

The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive, 18″” woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition, it may also be used in arrays consisting entirely of VRX918SP subwoofers.

JBL VRX932LAP

Overview

Built-in JBL Drivepack DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
JBL’s exclusive neodymium magnet Differential Drive® woofer for high-power capacity and light-weight.
VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. 2408 represents the latest in JBL Professional compression driver design.
Constant Curvature waveguide for unprecedented array coherence.
Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
Array Configuration Selector permits “array shading”.
Specs

Power Rating: 1750 Watts Peak, 875 Watts Continuous
Frequency Range: 57 Hz – 20 kHz (-10 dB)
Frequency Response: 75 Hz – 20 Hz (+/-3db)
Maximum Peak Output: 136 dB SPL at 1m
Coverage Pattern: 100 x 15 nominal
DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance): LF: 750 Watts, HF: 125 Watts
DPC-2 Output Sectoin: LF: Dual-Bridged Technology™, Class D
Autio Input Connector: XLR with loop through
LF Driver: 1 x JBL 2262FF 305 mm (12 in) neodymium magnet
HF Driver: 3 x JBL 2408J, 38 mm (1.5 in)
User Controls: Input Attenuator (0-16 dB)
Signal Processings: DSP based, resident in Input Module
AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60 Hz
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
AC Current Requirements: 6A per system at 120V, 3A per system at 240V
Enclosure: 25/15 mm, 11-ply birch plywood
Suspension / Mounting: Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting
Finish: Black DuraFlex finish
Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
JBL VRX918SP

Built-in JBL Drivepack DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive® woofer for high-power capacity and lightweight.
Integral rigging hardware for simple connection of enclosures and optional array frame.
20 mm threaded pole socket for solid, secure satellite speaker mounting.
Large port area for reduced distortion.
Power Rating: 1500 Watts Peak
LF: Dual-Bridged Technology™, Class D
Frequency Range: 31 Hz – 220 Hz
Frequency Response: 34 Hz – 220 Hz
Maximum Peak Output: 126 dB SPL at 1m
Bandpass Nominal Impedance: LF: 2 x 2 ohms
LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil
Differential Drive® woofer with neodymium-magnet
Audio Input Connector: XLR with loop through
User Controls: Input Attenuator (0-16 dB), Selectable 80 Hz or 120 Hz Low Pass, 80 Hz High-Pass enable/disable for XLR loop thru.
Signal Processing: DSP based, resident in Input Module
System Management: DSP based limiters for mechanical and thermal protection
AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz
AC Line Voltage: User selectable: 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
AC Current Requirements: 6A per system at 120V, 3A per system at 240V
Enclosure: 18 mm birch plywood.
Suspension / Mounting: Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
Finish: Black DuraFlex™ finish
Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
JBL Speaker Pole

SKU JBL-VRX932LAP
Brand JBL
Weight 288.000000